What's New in AgSense 365 - September 2026Check out the latest updates to AgSense 365 including some exciting new features
The Crop Link Automation feature allows you to automatically control relays based on sensor readings. This enables your system to respond dynamically to field conditions without requiring manual input. With this feature, on the Crop Link configuration screen, you can set up automation within a single Crop Link device or across two linked devices, improving operational efficiency and reducing the need for manual intervention. Automation is configured by connecting sensor readings to relay actions. To configure this:
Once configured, the system will automatically execute the relay action when the sensor crosses the defined threshold.
News Banners You will now be able to see important messages directly in the AgSense 365 app with the News Banner feature. These banners deliver timely alerts about outages, maintenance, and new features directly in the web and mobile apps so you don’t miss critical system or device-impacting updates.
Click here to learn more about News Banners. Corner machines with Gen. 2 Guidance and VRI-iS or EnCompass now give you the ability to initiate a sprinkler valve test via a new widget in the AgSense 365 mobile app. Prior to this feature, the sprinkler valve test could only be started from the panel itself. To run a sprinkler valve test, the unit must be in a running state and VRI-iS must be enabled at the panel. The valve test can be run either wet or dry, and you will have the ability to run the test for all valves or for a selection of valves on the machine. For example, imagine you want to run a test for all the valves on the corner. Rather than starting the test at the panel and attempting to walk or drive to the end of the machine to watch the sprinklers cycle on and off, you can start the test from your phone from anywhere in the field. Please note, this new widget is only available in the mobile app. Additionally, your ICON Link must be on firmware version 92 or higher and the SRB firmware must be on version 1.49 or higher to enable the Sprinkler Valve Test widget.
|
